Comments on: DIY Epoxy Garage Floor Tutorial

By: Wendy

Wendy — Thu, 01 Oct 2020 12:09:50 +0000

I was hoping to use the Epoxy to cover old “glue” from tiles that were on the floor. Tiles are gone, glue still there. I started to power wash the gunk off but 3 hours in hadn’t gotten to far. If I clear the dirt and other grime, can I epoxy over the glue??

By: DIYPETE

DIYPETE — Mon, 12 Mar 2018 17:00:00 +0000

In reply to Lorena. Hi Lorena, I think you may need a bit more, but not a full gallon of each. Probably more like a quart or so of each. I would see how the first coat goes and then buy additional as needed.

By: Lorena

Lorena — Sun, 11 Mar 2018 05:40:00 +0000

Do you think 1 gal of part A and B will be enough for 450 sq ft?

By: DIYPETE

DIYPETE — Mon, 16 Oct 2017 16:52:00 +0000

In reply to joe shipp.

Hi Joe,

Sherwin Williams makes great products and this looks like another one of them. While it is water based not solids based it looks like it will work great for a garage floor as it is recommended for a variety of concrete flooring applications. Hope all goes well!

Cheers!

By: Shoban P

Shoban P — Wed, 11 Oct 2017 21:20:00 +0000

In reply to Pete Sveen. How did you fill your control joints

By: joe shipp

joe shipp — Wed, 11 Oct 2017 16:58:00 +0000

Hi DIYPete, I goofed and picked up ArmourSeal 8100. Can I use this instead of the 1000?

By: Lee

Lee — Wed, 27 Sep 2017 19:16:00 +0000

Awesome post floor looks great. If you would like to see other applications for epoxy floors check out one of ours…………………………http://www.highperformancesystems.com/industrial-epoxy/warehouse-flooring/

By: DIYPETE

DIYPETE — Mon, 21 Aug 2017 20:12:00 +0000

In reply to Mr. Huge. The product covers about 220 sq ft. per gallon so you will need about 5 gallons for that size garage floor. Cheers!

By: Mr. Huge

Mr. Huge — Sun, 20 Aug 2017 15:54:00 +0000

I am thinking of doing this before I move into my new house which I’m building. I like the idea of a color/flakes & then a clear
coat. My new garage will have a total of 1100sq ft. How much product will I need for everything?

By: DIYPETE

DIYPETE — Mon, 03 Jul 2017 15:24:00 +0000

In reply to Valerie Gingrich Harper. Hi Valerie! Having an epoxy floor that lasts and is done right is 90% about the prepping. I would power wash the surface. Best of luck!